NEW Stronger Alloy Band Wheels, Sawmill Upgrade - Band Sawmill Build #25

  Vaatamised 146,433

Donn DIY

2 aastat tagasi

Latest video: eepost.info/my/video/o2-LdnVnopKFuos.html
Installing new alloy wheels on my homemade mobile band sawmill to replace the old spoke wheels that were quite wobbly and eccentric. These aluminium rims allow also for more blade tension and thus more accurate cuts. This undertaking wasn't just a bolt-on deal, I had to turn adapters/inserts to custom fit the bearings I already use on the mill into the new alloy wheels so I didn't have to change anything else. It worked out surprisingly well despite my previous thoughts and fears. Also later when I adjusted the guide rollers I noticed they pointed up a little - it was maybe due to the derailment of the saw carriage a month ago. Nothing was bent, just the slack was taken out of some things. I adjusted the rollers and it has a new blade on it now so it should make near perfect cuts from now on. One more thing that got done was the stupid height adjustment hand crank system that only allowed me to cut material with 30 mm increment. I modified a hand winch to replace it and now every click on the winch equals to 1 mm. So I can cut material down to 1 mm in thickness. Theoretically. :D Thanks for watching and stay tuned for future videos. Cheers!
#eestiyoutuber #sawmill #donndiy
Soundtrack:
Pomade - Silent Partner (EEpost Audio Library)

Kommentaarid
Donn DIY
Donn DIY 2 aastat tagasi
So what about the paint? Most of the material I used for this mill was kept outside in the rain and snow years before turning it into a mill and nothing happened. Hell, the material I made the blade guards out of has been outside under a tree for over three decades - still in usable condition. What I'm trying to say is I'm not gonna paint it at the moment - it's too cold here for the paint to cure and too wet to even apply it. This mill is not gonna turn into a heap of rust within the next 6 months - that's when I'm planning on painting it eventually - May 2019. It's not gonna turn into a heap of rust even within the next 6 years so no worries, people!
RoLid
RoLid Aasta tagasi
Okay. :)
veronica morales reyes
veronica morales reyes 2 місяці tagasi
What is the width of the blade and how many teeth per inch does it have? thanks
El taller de Elber G....
El taller de Elber G.... 4 місяці tagasi
I'm in the making of a sawmill. When it comes to the motor/belt reduction. Whats more important? Go fast? Go strong?
El taller de Elber G....
El taller de Elber G.... 4 місяці tagasi
@Donn DIY Thanks!
Donn DIY
Donn DIY 4 місяці tagasi
There's info on blade speed on the Internet. There's a sweet spot. Both speed and torque matter.
Triplaglol
Triplaglol 7 місяців tagasi
Why is everybody saying paint it? I like this rusty look tbh and makes it even more clear its self made. If it would look new with paint it would look like u bought the thing and didn't make it urself..
Yan Pian
Yan Pian 9 місяців tagasi
Nice sport rim...im going to make one sawmill
ania Klementowicz
ania Klementowicz 10 місяців tagasi
Nice build.
Donn DIY
Donn DIY 10 місяців tagasi
Thanks!
David Hall
David Hall Aasta tagasi
My family was in logging business for 150 years it makes me happy to see your home made saw mill in operation. You have done a fine job. Thank you for posting.
Brad junes
Brad junes Aasta tagasi
But what about the balancing of the tires this time? As a machinist for 55 years, love seeing how an early lathe still works. Much thanks from a now a CNC owner / operator.
Donn DIY
Donn DIY Aasta tagasi
Wheels got balanced at a tire shop.
Morgan Adair
Morgan Adair Aasta tagasi
I wish to open mouth and put in foot. You know what they say, paint won't pull the plow!! Well with those upgrades you should be a force to be reckoned with. I would advise a carpenters apron or something to keep shit tail out of stuff but with over a million viewers, What can I add that you haven't thought of. Your overworking your poor brain with worry and yet over a million viewers you are not going to be told what to do. I'm so proud of you young man
berke can34
berke can34 Aasta tagasi
you better paint, man
ALWAYS EMANON
ALWAYS EMANON Aasta tagasi
Awesome.
chabka34
chabka34 Aasta tagasi
Why not just use the tires on the rims thay seam to me to be better for what you are doing
StreetMachine18
StreetMachine18 Aasta tagasi
Much better then April Wilkerson’s band saw mill!!!!
Michael McClure
Michael McClure Aasta tagasi
For those crying about the paint, can you say Rat Rod saw mill. Some people would use it as is. ( including me) My question was why the wheel swap, but that was pointed out. A great thanks for building it from a few folks in the USA.
Johnny
Johnny Aasta tagasi
What kind a motor Is? Have plans, great proyect
Donn DIY
Donn DIY Aasta tagasi
Industrial 15 HP petrol engine. Works great.
niklar55
niklar55 Aasta tagasi
Before you put paint on the iron work, paint it with ferric chloride. This will convert the rust into a nonferrous skin, saves you removing the rust, except the loose stuff, and stops further rust.
lucas guemra
lucas guemra 2 aastat tagasi
Ola Donn ! sou aqui do Brasil vc nao teria o projeto dessa sua moinho detalhada pra mi passar ; Desde ja Parabens Belo moinho ;;
Лёха лось
Лёха лось 2 aastat tagasi
Чем ему старые калёса помешали?
скот эштон
скот эштон 2 aastat tagasi
Смотрю и "жаба давит". У нас чтобы такую установку соорудить надо "10 лет" на дядю пахать. А если приобрести весь вспомогательный инструмент,ещё 15лет. Чё за такая несправедливость то?
kgh32
kgh32 Aasta tagasi
Что за бред?
Patrik Carlsson
Patrik Carlsson 2 aastat tagasi
I had a XJ600 before, really great bike! Why the wheel change?
Donn DIY
Donn DIY 2 aastat tagasi
The spoke wheels were eccentric to the hub and made the blade vibrate. This mod took care of it. The blade is steady now.
Meelis Hein
Meelis Hein 2 aastat tagasi
Hästi paned. Mäkaiver on poisike sookörval. Kena vaadata kohe.
Donn DIY
Donn DIY 2 aastat tagasi
Hahaa! Tore, et meeldis. ;)
Sultan Jaan
Sultan Jaan 2 aastat tagasi
wow nice
Hard Enduro Tambov Russia
Hard Enduro Tambov Russia 2 aastat tagasi
Чувак от куда у тебя ИЖ!!!???а точнее колеса!
Titan Studios
Titan Studios 2 aastat tagasi
Great video as always !! Keep up the hard work and dedication !!
prancstaman
prancstaman 2 aastat tagasi
What color are you going to paint it? LOL.
Guust
Guust 2 aastat tagasi
What I learned today, steel is cheap in Estonia, but paint is expensive...😅😉👍
bbqpat1
bbqpat1 11 місяців tagasi
machinery gray : )
jishimoari
jishimoari 2 aastat tagasi
Ok nice, but, why?
Donn DIY
Donn DIY 2 aastat tagasi
The main reason for this mod was the eccentric properties of the spoke wheels of the USSR made IZ Jupiter motorcycle which made the blade vibrate and undulate. Also they had some flex in them - I could hear the spokes squeak. This mod took care of those problems.
greggy weggy
greggy weggy 2 aastat tagasi
Pimp my Mill.
madox76
madox76 2 aastat tagasi
How bad is the wear on the back portion of the blade guides, since with just the flat surface they are rubbing so much against the back of the blade? or for that matter is it wearing down the back of the blade?
Donn DIY
Donn DIY 2 aastat tagasi
They're OK.
Hurm0s
Hurm0s 2 aastat tagasi
As others have commented, you should really paint it or give it some kind of rust protection.
Michal Pastyřík
Michal Pastyřík 2 aastat tagasi
Looks cool
Nblad
Nblad 2 aastat tagasi
Paint
Jussi Rissanen
Jussi Rissanen 2 aastat tagasi
Nice work
Marion Makarewicz
Marion Makarewicz 2 aastat tagasi
I see you upgraded the coolant toothbrush too! Will be interested to see how well the new wheels perform. One objection to using tires I've heard is that you can never get enough tension because of the air pressure in the tires isn't enough to offset things. The new wheels will take out spoke give but will still leave tire give. You haven't mentioned that issue before so I am assuming that it's no problem. Thanks again for posting. You are always an inspriation.
Eye Toldyoosso
Eye Toldyoosso 2 aastat tagasi
All you need now is Go Fast Stripes...;-p
Johannes Fiftyeight
Johannes Fiftyeight 2 aastat tagasi
You should build a roof over it!
OLD DAWG DREAMING
OLD DAWG DREAMING 2 aastat tagasi
Great job Donn, always enjoy watching your skills being put to work. Thanks for sharing.
ImpossibleTM
ImpossibleTM 2 aastat tagasi
But aren't those bearings and shafts too small for a sawmill?
Mike festiva
Mike festiva 2 aastat tagasi
impossible 9 I built a bandsaw mill using motorcycle wheels and swing arms welded together, I have been running it for about 4 years now and it’s been fine. I have replaced the the wheel bearings once, but the ones that went out where stock and installed sometime back in the early 80s. The wheel bearings are cheap and even if you had to replace them once a year you would get far more lumber milled in that year then the $20 it would cost in bearings. Take care. Ps Good job on your mill! It’s awesome being able to cut your own lumber :)
Donn DIY
Donn DIY 2 aastat tagasi
No. It has worked so far. Maybe they'll wear out quicker and I'll have to replace them more but it's no problem.
nick d
nick d 2 aastat tagasi
As usual great job!! I’m still very impressed with your mechanical skills. I’ve read some of other comments and didn’t see any trolls cry about driving the bearings in with a hammer and a socket. I say “ hell yes! Drive them bitches home!!! You ain’t got all day dicking with a press!! “ As a tip for you, I’ve found it much more comfortable to use a socket driver extension hit the extension and the force is spread evenly across the socket face or back. Instead of hitting the socket itself and causing the bearing to start crookedly in the hole. Have a great day.
Nails
Nails 2 aastat tagasi
a gallon or two of paint cant cost that much.
Wayne Crews
Wayne Crews 2 aastat tagasi
Looks great Donn. I hope the “new” wheels make an improvement. The winch certainly should. 👍🏻👍🏻👍🏻 It is funny how “Hey Donn. You put the wheel on backwards.” becomes “You triggered my OCD.” No wonder the world is messed up. 90% of the people think they have OCD because a backwards wheel “triggered” them. 😂🤣
Monnie Holt
Monnie Holt 2 aastat tagasi
That sawmill is crying, please paint me! Great looking machine, you did a great job
Practical Metal
Practical Metal 2 aastat tagasi
Donn love the mod. Was the sprocket smaller? Did it speed up the blade?
Donn DIY
Donn DIY 2 aastat tagasi
Yes, the sprocket is smaller. I will try it, it might be okay speed-wise.
Fava Fava
Fava Fava 2 aastat tagasi
Excellent improvisation , and machining skills , when do you plan to start the mini excavator rebuild , keep the vlogs coming , top work .
R Martin
R Martin 2 aastat tagasi
now put that saw mill to work and cut some lumber for a good work bench, been watching you sense the saw mill build and wondered why you didnt have a good bench to work on, keep the videos coming.
Peter195267
Peter195267 2 aastat tagasi
With those wheels you will be cut much faster.Hahahaha
Reg.T
Reg.T 2 aastat tagasi
I can hear it crying In West Australia please paint me
Tanisi Tim
Tanisi Tim 2 aastat tagasi
Nice, now paint.
Carsten Andersen
Carsten Andersen 2 aastat tagasi
Thank you for sharing. God bless you and your family
Barry Bogan
Barry Bogan 2 aastat tagasi
Looks great mate; What air pressure do you have in the tyres?
Donn DIY
Donn DIY 2 aastat tagasi
Something like 3.5 Bar. These tires can probably take even more.
phillip hall
phillip hall 2 aastat tagasi
Awesome job!! Was you having trouble with the spike wheels?
phillip hall
phillip hall 2 aastat tagasi
You have done awesome work! I applaud you for your persistence and great craftsmanship. I can only imagine how much I would enjoy such a wonderful machine! Thanks for posting the videos!
Donn DIY
Donn DIY 2 aastat tagasi
They were wobbly and eccentric. I would not have bothered with the mod otherwise.
CurlyG65
CurlyG65 2 aastat tagasi
Looks like a racing one now..
Anthony Medford
Anthony Medford 2 aastat tagasi
Great work as always. Have you thought about treating the rust on the sawmill yet, I would hate to see all your hard work rust away.
Cereal Killer
Cereal Killer 2 aastat tagasi
Hei donny, never leave blade under tension for a long period of time and my *OCD* kicked in when you installed one wheel in wrong direction hahaha
Cereal Killer
Cereal Killer 2 aastat tagasi
@Donn DIY I have never said you did, Just a friendly reminder not to do so
Donn DIY
Donn DIY 2 aastat tagasi
I haven't left a blade under a tension for a long period of time ever - why do you presume I have?
ozdatman
ozdatman 2 aastat tagasi
Number 1!!!
Пацанки. 5 сезон 9 выпуск
1:31:22
Телеканал ПЯТНИЦА
Vaatamised 5 mln
Homemade Bandsaw Mill From Old Car Wheels
09:51
Way Out West Blow-in blog
Vaatamised 986 tuh
#651 More Hardwoods on The Woodmizer LX 150 Sawmill, Red Oak
18:39
Outdoors With The Morgans
Vaatamised 4,6 mln
Пацанки. 5 сезон 9 выпуск
1:31:22
Телеканал ПЯТНИЦА
Vaatamised 5 mln
ИГРА AMONG US В РЕАЛЬНОЙ ЖИЗНИ!
28:47
Вопрос ребром - Сергей Бурунов
42:39
THE DISCORD COOKING COMPETITION FINALE
12:44
Quackity
Vaatamised 1,8 mln
Reacting to James Charles Impressions!
14:13
James Charles
Vaatamised 7 mln
I Invaded George's Dating Show.
12:07
TommyInnit
Vaatamised 2,7 mln